Monarch Industrial Products, Manufactures & suppliers of liquid filtration and strainers for industrial applications
Menu
Monarch temporary cone strainers or start up strainers

Temporary Cone Strainer

Monarch Temporary Truncated Cone or Temporary Basket Strainers are constructed of a heavy gauge perforated stainless steel. Temporary strainers are designed to provide inexpensive protection of fluid and gas handling equipment during commissioning and start up.

Available in standard and custom sizes to suit most flange types including ANSI, Table D/E etc.

Monarch Industrial Products manufacture temporary basket strainers in all ratings and pipe sizes for virtually all fluid duties.

Temporary cone or basket strainers can be fabricated to almost any length in 304 or 316 Stainless Steel. Standard lengths are 100% or 150% which refers to the open area of the cone or basket to the cross section of the inlet pipe.

Temporary basket (truncated cone) strainers are shorter in length than temporary cone strainers. Temporary basket strainers can be supplied with mesh lining on the inside or outside of the basket depending upon the orientation to the flow of the media.

Special reinforcing rings and supports can be installed to maintain integrity of the cone or basket for heavy load applications where high differential pressures may be experienced.

When Inquiring please specify:
  • Flange Type (e.g. ANSI, Table D etc.)
  • Flange Size
  • Perforation or mesh Size
  • Open Area Ratio to Pipe
  • If mesh lined, please specify the direction of flow
  • Material of construction: 304 or 304 Stainless Steel
Monarch temporary cone strainer or start up strainer drawing ANSI 150#
ANSI 150# RF - Dimensions (mm) shown are subject to change.
(L)
(Size) (A) (B) 100%
3/4" 54 16 30
1" 64 19 41
1-1/2" 83 32 56
2" 102 44 76
2-1/2" 121 57 81
3" 133 70 102
4" 171 95 130
5" 194 117 165
6" 219 137 207
8" 276 187 259
10" 337 238 330
12" 406 279 406
14" 441 311 432
16" 511 356 508
18" 540 400 584
20" 597 445 635
24" 708 540 762

Dimensions are based on using 3mm perforations with an open area of 40%.

Percentage of open area to cross section of schedule 40 pipe.

150%, 200% and 300% are available. Lengths will depend on the open area of the perforated material.

Monarch temporary cone strainer or start up strainer drawing ANSI 300#
ANSI 300# RF - Dimensions (mm) shown are subject to change.
(L)
(Size) (A) (B) 100%
3/4" 64 16 30
1" 70 19 41
1-1/2" 92 32 56
2" 108 44 76
2-1/2" 127 57 81
3" 146 70 102
4" 191 95 130
5" 238 117 165
6" 263 137 207
8" 318 187 259
10" 397 238 330
12" 454 279 406
14" 483 311 432
16" 555 356 508
18" 603 400 584
20" 676 445 635
24" 784 540 762

Dimensions are based on using 3mm perforations with an open area of 40%.

Percentage of open area to cross section of schedule 40 pipe.

150%, 200% and 300% are available. Lengths will depend on the open area of the perforated material.

Monarch temporary cone strainer or start up strainer drawing ANSI 600#
ANSI 600# RF - Dimensions (mm) shown are subject to change.
(L)
(Size) (A) (B) 100%
3/4" 64 16 30
1" 70 19 41
1-1/2" 92 32 56
2" 108 44 76
2-1/2" 127 57 81
3" 146 70 102
4" 191 95 130
5" 238 117 165
6" 263 137 207
8" 318 187 259
10" 397 238 330
12" 454 279 406
14" 483 311 432
16" 555 356 508
18" 603 400 584
20" 676 445 635
24" 784 540 762

Dimensions are based on using 3mm perforations with an open area of 40%.

Percentage of open area to cross section of schedule 40 pipe.

150%, 200% and 300% are available. Lengths will depend on the open area of the perforated material.

Custom Cone Strainer Drawing

Download, Complete and Return


Temporary Strainer Operation Manual

Installation, Operation & Maintenance Manual for Temporary Strainers

Key Temporary Strainer Applications
  • Commissioning and start up
  • Chemical processing
  • Petroleum
  • Power generation
  • Marine
  • Water
  • Oil & Gas
  • Offshore
  • Iron & Steel
  • Automotive
  • HVAC
  • Pulp & Paper
  • Food & Beverage
  • Pharmaceutical


Monarch Asia Pacific Pty Ltd
T/as Monarch Industrial Products
ABN 68 170 304 574
Workshop & Warehouse:
Unit 3, 8 Bult Drive
Brendale, QLD 4500
Phone : +61 (0) 7 3889 9949
Fax No: +61 (0) 7 3889 9117