Wright-Austin-Eaton Gas Liquid Separators remove up to 99% of all damage causing moisture and solid particles larger than 10 microns.
Typically installed following an intercooler or aftercooler, the separators are used to remove entrained moisture that would otherwise cause damage in successive stages of compression or to subsequent processes. They're ideal for entrainment removal in primary air lines leading to air-using equipment such as air chucks, air nozzles, and paint spray equipment.
Separators are often installed ahead of steam turbines to protect the turbine blades from the erosive action of wet steam, pipe scale, and other damage-causing entrained solids. They're also installed in steam distribution lines to assure clean, dry steam enters heat exchangers, pressure reducing valves, temperature regulators, meters, and other process equipment.
In-line gas/liquid separators are compact, easy to install and can are supported by the pipeline. Available in Vertical and Horizontal configurations.Product Group Information »
Two-stage gas/liquid separators are for applications requiring extremely fine entrainment removal.Product Group Information »
Exhaust Heads are designed to separate entrained water and oil from exhaust air, gas or steam prior to being discharged directly into the atmosphere.Product Information »
The Coalescer Separator's unique two-stage design removes up to 99% of all liquid and solid particles larger than 4 microns in size.Product Information »
Dry Type Gas/Liquid Separators have been designed for applications with a higher than normal load of entrained solids.Product Information »
Float Drain Traps are available in a variety of models and materials of construction.Product Information »
Monarch Asia Pacific Pty Ltd, Copyright © 2018 All Rights Reserved
Release: Z-Axis 4.0